Skip to content
Prof.Dr. Cüneyt ArslanTR
Prof.Dr. Cüneyt Arslan

About

About

Born in 1958 in Balıkesir, Cüneyt Arslan graduated from Pendik High School in 1974 and received his B.Sc. (1980) and M.Sc. (1982) degrees from the Faculty of Metallurgy of Istanbul Technical University. In 1983 he passed the Ministry of National Education’s examination for doctoral studies abroad and went to the United States. He received his Master’s degree in 1986 and his Ph.D. in 1991 in extractive metallurgy from the Henry Krumb School of Mines, Columbia University (New York). Returning to Turkey the same year, Dr. Cüneyt Arslan was appointed Assistant Professor at the Department of Metallurgical and Materials Engineering, Faculty of Chemistry and Metallurgy, I.T.U. He became Associate Professor in 1995 and Professor in 2002, and retired in 2025. Between 2012 and 2022 he also served as Director of the Prof.Dr. Adnan Tekin Materials Science and Production Technologies Applied Research Center at I.T.U. Dr. Arslan has more than 100 national and international scientific publications, books and book chapters in the fields of hydro- and electrometallurgy. He has also served as director and researcher in numerous applied and research projects and has supervised undergraduate, master’s and doctoral theses. He is married and the father of a daughter.

University
Istanbul Technical University
Faculty
Chemistry-Metallurgy Faculty
Department
Metallurgical & Materials Engineering Department
Address
34469 Maslak, Istanbul
E-mail
arslanc [at] itu [dot] edu [dot] tr
arslan [dot] cuneyt [at] gmail [dot] com
Foreign language
English

Interests

  • Electrometallurgy
  • Hydrometallurgy
  • Transport Phenomena
  • Process Modeling and Simulation

Education

Ph.D.

1986 – 1991

Columbia University (New York, U.S.A.)

M.Phil.

1990

Columbia University (New York, U.S.A.)

M.Sc.

1984 – 1986

Columbia University (New York, U.S.A.)

M.Sc.

1980 – 1982

I.T.U. Metallurgy Faculty

B.Sc.

1975 – 1980

I.T.U. Metallurgy Faculty

Academic

Retired

January 2025

Professor

2002 – 2025

I.T.U. Chemistry-Metallurgy Faculty, Metallurgical & Materials Engineering Department

Assoc.Prof.

1995 – 2002

I.T.U. Chemistry-Metallurgy Faculty, Metallurgical & Materials Engineering Department

Asst.Prof.

1991 – 1995

I.T.U. Chemistry-Metallurgy Faculty, Metallurgical & Materials Engineering Department

Research Assistant

1989 – 1990

Columbia University, New York, U.S.A.

Research Assistant

1980 – 1982

I.T.U. Metallurgy Faculty

Administrative

2012 – 2022

Director, I.T.U. Prof.Dr. Adnan Tekin Materials Science and Production Technologies Applied Research Center

2008 – 2014

Member of Administrative Board, I.T.U. Chemistry-Metallurgy Faculty

2006 – 2009

Division Head, I.T.U. Chemistry-Metallurgy Faculty, Metallurgical & Materials Engineering Department, Extractive Metallurgy Division

2004 – 2006

Member of Transfer & Adaptation Commission, I.T.U. Chemistry-Metallurgy Faculty

2000 – 2003

Member of ABET Commission, I.T.U. Metallurgical & Materials Engineering Dept.

2000 – 2001

Vice Chair, I.T.U. Metallurgical & Materials Engineering Department

1998 – 2001

Member of Administrative Board, I.T.U. Chemistry-Metallurgy Faculty

1995 – 2001

Member of Scholarship Commission, I.T.U. Chemistry-Metallurgy Faculty

1992 – 1995

Member of Internship Commission I.T.U. Chemistry-Metallurgy Faculty

Awards & Fellowships

1990 – 1991

William Campbell Fellowship, Henry Krumb School of Mines, Columbia University, New York, U.S.A.

1983 – 1989

Fellowship to study abroad to pursue a Ph.D. degree, Ministry of Education of the Turkish Republic

Member of

  • TMMOB Chamber of Metallurgical Engineers (1980 – present)
  • TMS of AIME (1985 – 1991)
  • The Electrochemical Society (1985 – 1991)

Academic Activities

Congress / Conference / Symposium Organized

  • ICAM 2015, 12th International Congress for Applied Mineralogy, Organizing Committee Member and Secretary, August 10-12, 2015, Istanbul Technical University, Istanbul, Türkiye (www.icam20l5.org)
  • Workshop on Energy and Emission Control in Istanbul and Its Surroundings, Organizer, 17 April 2015, Istanbul Technical University, Faculty of Mines (http://www.isteek.org/calistay/)
  • 15th International Metallurgy and Materials Congress, Member of Organizing Committee, 11-13 November 2010, Tuyap Fair and Congress Center, Istanbul.
  • 14th International Metallurgy and Materials Congress, Chair of the Organization Committee, 16-18 October 2008, Tuyap Fair and Congress Center, Istanbul.
Courses Instructed (12)
Master’s and Ph.D. Theses administered (27)
  • Yahya Akbari Sorkhe, (Ph.D.), “Production of Titanium-Based Oxides from Ilmenite Using Hydrometallurgical and Pyrometallurgical Processes”, June 2026
  • Ali Ulus, (Ph.D.), “Production and Characterization of Aluminum Alloy Metallic Foams by Continuous Casting Method”, June 2026
  • Duygu Tuluk Türkmani, (M.Sc.), “Synthesis and characterization of boron carbide additived PMMA (polymethyl methacrylate) polymer composites by ATRP method”, Co-Advisor: Prof.Dr. Nilgün Baydoğan, January 2023
  • Merih Anıl Emir, (M.Sc.), “Investigation of the effects of different alkali resources used as melting agents on the technological properties of ceramic wall tiles”, June 2020
  • Selda Nayir, (Ph.D.), “Cold sintering process on molybdenum disilicide and graphite composite electrodes”, June 2020
  • Ümüş Hale Tuğral Arslan, (Ph.D.), “Hydrothermal growth of ZnO nanowires enhanced characteristic properties”, Co-Advisor: Prof.Dr. Nilgün Baydoğan, March 2020
  • Mazhar Ümit Büyükfırat, (Ph.D.), ““Shortening the Heat Treatment Processes of Extrusion Molds with Subzero Heat Treatment and Extension of Mold Life with PVD Coating”, August 2019
  • Raşit Sezer, (Ph.D.), “Al-Sr master alloy production from domestic celestite ore and investigating its properties”, August 2018
  • Emre Ulaştı, (M.Sc.), “Investigation of production parameters on mechanical properties of thermo-mechanical rolled S700MC steels”, June 2018
  • Tayfun Bel, (Ph.D.), “Multi-scale self-healing nanocomposite shielding material for aerospace, (Co-Advisor: Prof.Dr. Nilgün Baydoğan)”, Co-Advisor: Prof.Dr. Nilgün Baydoğan, January 2018
  • Ayşegül Bilen, (M.Sc.), “Strontium carbonate production from local celestite concentrate via hydrometallurgical processes, December 2017. (Bapsis ITU”, December 2017
  • Begüm Ucun, (M.Sc.), “Development of Process of Adding Binder to HNS-IV Explosive”, September 2015
  • Özgün Ünal, (M.Sc.), “Recovery of metallic values that RAM chips contain via hydrometallurgical routes, July 2015. (Bapsis ITU”, July 2015
  • Mahmut Sefa Berke, (M.Sc.), “Extraction of the lanthanide group metals that Eskişehir-Beylikahır complex ore contain, from thorium and uranium via metallurgical processes, November 2014. (Bapsis ITU”, November 2014
  • Emre Yılmaz, (M.Sc.), “Optimization of process parameters for recovering the metallic values from dental amalgam wastes, August 2014. (Bapsis ITU”, August 2014
  • Erdem Kılıçaslan, (M.Sc.), “Production of manganese sulfate solution by leaching high carbon ferromanganese and process optimization”, June 2013
  • Enis Sevim, (M.Sc.), “Process Optimization for Purification of Manganese Leach Solutions Used in Hydrometallurgical Manganese Production”, June 2013
  • Merve Kızılarslan, (M.Sc.), “Measures to increase traffic safety on highways: Guardrails”, Bahçeşehir University, Urban Systems and Transportation Management Program, January 2012
  • Hayriye Elvan Ekiz, (M.Sc.), “Recovery of valuable metals from copper converter slags”, May 2009
  • Ayşe Gamze Onuk, (M.Sc.), “Effect of Different Anode Materials on Electrolysis of Chromium from Chrome-Alum Solution”, January 2007
  • Ali Öztürk, (M.Sc.), “Recovery of Copper and Zinc from Fire Refining Furnace Flue Dusts”, May 2005
  • Burak Aksoylu, (M.Sc.), “Copper refining electrolysis at high current densities”, May 2003
  • Gökhan Orhan, (Ph.D.), “De-metallization of galvanic industries’ waste solutions in high convection electrolysis cells”, May 2001
  • Murat Çınarlı, (M.Sc.), “Removal of iron from manganese solutions and optimization of process variables”, February 1997
  • Ahmet Demir, (M.Sc.), “Acidic leaching of Denizli-Tavas manganese ores and process optimization”, June 1996
  • Murat Ateş, (M.Sc.), “Product and process optimization in pressure casting via OHTEA technique”, June 1995
  • Gökhan Orhan, (M.Sc.), “Investigating the possibility of metallic chromium powder production via aluminothermy”, September 1994

Projects

TUBITAK – ISTKA – BOREN (7)
  • 2015 – 2017: Director, “Production of Al-Sr Master Alloy for Aluminum Casting Industry from Domestic Celestite Ore”, TUBITAK / 115M631
  • 2014 – 2015: Director, “Development of a New System to Clean the Exhaust Filters of Public Transportation Vehicles with Diesel Engine”, Istanbul Development Agency, ISTKA · ISTKA-2014/EVK
  • 2013 – 2014: Director, “Educating the Workers of Precious Metal Processing and Recycling Plants in Istanbul and the Engineers of Institutions that Supervise those Plants on behalf of the Public”, Istanbul Development Agency, ISTKA · ISTKA-2012YEK-48
  • 2013 – 2014: Researcher, “Industrial Activities Related with the Resources of ITU Particulate Materials and Characterization Laboratories”, Istanbul Development Agency, ISTKA · ISTKA/2012/BİL/28
  • 2011 – 2012: Director, “Development of New Generation Boron added LiMxByO (M=Fe, Mn, Ni) based Cathode Materials for Li Ion Batteries via Ultrasonic Spray Pyrolysis (USP) Technique”, BOREN / 2011-Ç0271
  • 2005 – 2007: Director, “Investigation of the electrolytic chromium production from domestic chromite ore and/or ferrochrome and modeling the process”, TUBITAK / 105M073
  • 2004 – 2005: Researcher, “Production of Light, Inexpensive and Nano-Sized Electroactive Electrodes (Anode + Cathode) for Electrochemical Energy Generation Systems”, State Planning Organization (DPT)
ITU BAP – Other (24)
  • June 2024: Director, “Production of pseudobrookite Fe2TiO5 powder from ilmenite by pyro- and hydrometallurgical methods”, ITU BAP
  • December 2023: Director, “Investigation of the effect of H2O2 and ozone on the aeration leaching process in synthetic rutile production from ilmenite using the Becher process”, ITU BAP
  • June 2023: Director, “Production of pseudobrookite Fe2TiO5 powder by pyro- and hydrometallurgical methods”, ITU BAP
  • October 2017: Director, “Production of SrCO3 from domestic celestite concentrate via hydrometallurgical processes”, ITU BAP
  • February 2015: Director, “Recovery of Metallic Values from Electronic Scrap”, ITU BAP
  • January 2015: Director, “Production and characterization of metallic foams”, ITU BAP
  • March 2014: Director, “Separation of Components from a Mixture of Lanthanide Group Metal Oxides via SX”, ITU BAP
  • March 2014: Director, “Optimization of process parameters for the recovery of metallic values from dental amalgam wastes”, ITU BAP
  • May 2012: Director, “Production of the manganese sulfate solution used in electrolytic manganese production by leaching different raw materials, and process optimization”, ITU BAP
  • June 2013: Director, “Optimization of the processes used for the purification of leach solutions in manganese production by hydrometallurgical methods”, ITU BAP
  • May 2009: Director, “Recovery of Non-Ferrous Metals from Copper Converter Slags”, ITU Research Fund
  • January 2007: Director, “Effect of Catholyte Flow Rate on Current Efficiency in Electrolytic Chromium Production from Synthetic Cr-Alum Solution”, ITU Research Fund
  • May 2004: Director, “Evaluation of Copper Refining Furnace Flue Dusts by an Alternative Method”, ITU Research Fund
  • May 2003: Director, “Copper Refining Electrolysis at High Current Densities”, ITU Research Fund
  • May 2001: Director, “De-metallization of Galvanic Industry Waste Solutions in High-Convection Electrolysis Cells”, ITU Research Fund
  • September 1998 – February 2000: Director, “Recovery of metallic values from the wastewaters of plating plants”, ITU Research Fund
  • January 1997 – October 1997: Researcher, “Coating of Lead Anodes with an Electroactive Oxide Layer for Energy Saving and Environmental Protection”, Technology Development Foundation of Turkey (TTGV)
  • January 1997 – October 1997: Researcher, “Dissemination of Quality Assurance Systems and Quality Techniques in Turkish Industry”, Technology Development Foundation of Turkey (TTGV)
  • January 1997 – January 1998: Director, “Removal of Iron from Manganese Solutions and Investigation of Process Variables”, ITU Research Fund
  • January 1996 – January 1997: Director, “Optimization of Process Parameters in the Evaluation of Denizli – Tavas Manganese Ores by Acidic Leaching”, ITU Research Fund
  • March 1995 – July 1995: Director, “Product and Process Optimization in Pressure Die Casting via the OHTEA Technique”, ITU Research Fund
  • January 1994 – December 1994: Director, “Investigation of the Possibility of Metallic Chromium Powder Production by the Electro-Alumino-Thermic Method”, ITU Research Fund
  • 1988 – 1989: Researcher, “Metallic chromium production via molten salt electrolysis technique”, Columbia University · Elkem Metals (Ohio, U.S.A.)
  • 1987 – 1988: Researcher, “Rehabilitation of Williamsburg Bridge Wires”
TUBITAK-TEYDEB Project Reviews (13)
  • 03.12.2012: Reviewer, “Development of membrane vanadium and membraneless lead-acid flow redox batteries and electronic power management”, TUBITAK-TEYDEB / 1120051
  • 24.01.2012: Reviewer, “Development of maintenance-free gel-type batteries for stationary installations”, TUBITAK-TEYDEB / 7110792
  • 04.11.2011: Reviewer, “Immobilization of the electrolyte on the anode, cathode and separators in lead-acid automotive batteries”, TUBITAK-TEYDEB / 3110540
  • 17.03.2011: Reviewer, “Optimization of the electrical and mechanical design of lead-acid battery electrodes by finite element analysis (FEA)”, TUBITAK-TEYDEB / 3110081
  • 31.05.2010: Reviewer, “Direct methanol fuel cell”, TUBITAK-TEYDEB / 3100170
  • 05.05.2008: Reviewer, “Hydraulic chromium processing mill”, TUBITAK-TEYDEB / 3080062
  • 07.12.2007: Reviewer, “Development of NiMH cells”, TUBITAK-TEYDEB / 3070592
  • 07.12.2006: Reviewer, “New design studies on large batteries”, TUBITAK-TEYDEB / 3060478
  • 22.08.2006: Reviewer, “Charging system for large batteries”, TUBITAK-TEYDEB / 3060212
  • 22.08.2006: Reviewer, “Prototype development of a Ni-MH battery module for hybrid electric vehicles”, TUBITAK-TEYDEB / 3060218
  • Reviewer, “Reducing self-discharge in wet batteries to 0.05% capacity/day”, TUBITAK-TEYDEB / 3970107
  • Reviewer, “Recovery of solid metallurgical wastes”, TUBITAK-TEYDEB / 3980245
  • 31.07.2002: Reviewer, “R&D project for the production of water-adsorbing molecular sieves from kaolin”, TUBITAK-TEYDEB / 3020102

Publications

International Articles (52)
  • Arslan F., Bulut G., Arslan C., “Recovery of valuable metals from copper slags as secondary resources: Selected laboratory-scale case studies”, Physicochem. Probl. Miner. Process., 62(5), 2026, 226485, DOI:10.37190/ppmp/226485
  • Sorkhe Y., Bavafa P., Derin B., Uzunoğlu A., Arslan C., “Flexible Asymmetric Photo-Microsupercapacitor Based on Pseudobrookite-Type Iron Titanate and V2CTX MXene for Solar-Assisted Energy Storage”, Small (2026): e75071. https://doi.org/10.1002/smll.75071
  • Arslan F., Uzunoğlu H.A., Arslan C., “Recovery of Bismuth and Other Metals from Copper Sulfide Ores via Flotation Followed by Ferric Chloride Leaching”, Critical Minerals Metals and Materials, https://doi.org/10.18311/c3m/2026/55153, Vol. 1, Issue 2, June 2026.
  • Sorkhe Y., Öztürk O., Arslan C., “CALPHAD-guided phase stability and defect chemistry of pseudobrookite synthesized from natural ilmenite”, Thermochimica Acta, Vol. 762, 2026, 180363, ISSN 0040-6031, https://doi.org/10.1016/j.tca.2026.180363.
  • Sorkhe Y., Bavafa P., Timur S., Arslan F., Arslan C., “Iron oxidation pathways in the aeration leaching of reduced ilmenite and their role in intensifying synthetic rutile production”, Canadian Metallurgical Quarterly, 1–15, 2026, https://doi.org/10.1080/00084433.2026.2656831.
  • Ulus A., Arslan C., “In Situ Produced Cast Aluminum Foam Cell Morphology Evaluation with the Perspective of Stabilizer and Molten Metal Interface”, International Journal of Metalcasting, 1-30, Dec. 2025. https://doi.org/10.1007/s40962-025-01821-2.
  • Sorkhe Y.A., Mansoor M., Bavafa P., Timur S., Ürgen M., Uzunoğlu A., Arslan C., “Synthesis of nonstoichiometric pseudobrookite (Fe2−xTi1+xO5) from ilmenite for use in flexible microsupercapacitors”, Journal of Materials Chemistry A, 14(7), , 4096–4112 Nov. 2025. https://doi.org/10.1039/D5TA07070H.
  • Arslan F., Arslan C., “Recycling of waste cell phones”, Recycling and Sustainable Development, 2025;18(1):49-55. https://doi.org/10.5937/ror2501049A.
  • Sorkhe Y.A., Bavafa P., Buldu A.İ., Yılmaz B.S., Derin B., Arslan C., “Synthesis of anatase powder by ilmenite digestion followed by selective thermal decomposition and leaching”, Ceramics International 51 (1), pp. 366-378, https://doi.org/10.1016/j.ceramint.2024.10.469.
  • Arslan F., Güven Z.B., Arslan Ü.Y., Benli B., Arslan C., “Solvent extraction of nickel from iron and cobalt containing sulfate solutions”, Material Science & Engineering International Journal, 7 (1), 1-6, 2023.
  • Arslan F., Perek K.T., Arslan C., Çuhadar İ.E., Altun A., “Studies on Acidic Leaching of Waste Mobile Phones”, International Journal of Mineral Processing and Extractive Metallurgy. Vol.7, Issue 2, June 2022 , pp. 36-42. doi:10.11648/j.ijmpem.20220702.11.
  • Tuluk D., Gül F.B., Arslan C., Baydoğan N., “The behaviour of boron carbide (B4C) powder on borax/pmma composite surface”, Journal of Nanomaterials & Molecular Nanotechnology, Volume 10, ISSN: 2324-8777, Joint Event on 33rd Nano Congress for Future Advancements & 12th World Congress on Chemistry, April 28, 2021, Webinar, Keynote (link)(PDF).
  • Arslan C., Gürmen S., Arslan F., Onuk A.G., “Lab-scale chromium electrowinning in a diaphragm-type cell: effect of anode material and the head (h), SCIREA International Journal of Metallurgical Engineering, Vol.5(1), Feb.2022, pp.1-14, open-access: (link) DOI: 10.54647/metallurgical45024.
  • Uysal C., Ertürk S., Arslan F., Arslan C.. “Recovery of Metallic Values in Smart Cards”, Research & Development in Material Science, 16 (1), pp.1775-1778, (2021), DOI: 10.31031/RDMS.2021.16.000878 (short communication)
  • Tuğral Arslan H., Arslan C., Baydoğan N., “The effects of the curing parameters of the hydrothermal solution on the characteristic properties of ZnO nanowires”, Journal of Optics, (2021), https://doi.org/10.1007/s12596-021-00757-0.
  • Sezer R., Hızlı İ.G., Bilen A., Ertürk S., Dışpınar D., Arslan C., “Metallothermic Production of Aluminum–Strontium Master Alloy for Modification of Silicon”, Metallography, Microstructure, and Analysis, vol. 9, pp. 833–840 (2020). https://doi.org/10.1007/s13632-020-00697-4.WOS:000589996700002
  • Sezer R., Bilen A., Hızlı İ.G., Ertürk S., Arslan C., “Effects of Furnace Slope and Rotational Speed on the Carbothermic Reduction of Celestite in a Laboratory-Scale Rotary Kiln Furnace”. Mining, Metallurgy & Exploration 37, 1273–1278 (2020). https://doi.org/10.1007/s42461-020-00223-8. WOS:000530973500001
  • Perek K.T., Benli B., Arslan C., Arslan F., “Recovery of ZnO from Lead-Zinc Flotation Tailings by Hydrometallurgical Processes –XRD, SEM, and AFM Studies”, Journal of Mining and Metallurgy, 56 A (1), pp.23-35, (2020), DOI: 10.5937/JMMA2001023P
  • Tuğral Arslan H., Arslan C., Baydoğan N., “Effect of Hydrothermal Solutions on Optical and Electrical Properties of ZnO Nanowires Grown on a ZnO: Al Seed Layer for Improved Mechanical Performance”, Journal of Nanoelectronics and Optoelectronics, 15 (3), 2020, pp.307-315, DOI: 10.1166/jno.2020.2748 WOS:000541477900001
  • Türk T., Alp İ., Sezer R., Arslan C., “Removal of arsenic from water using copper slag”, Journal of the Southern African Institute of Mining and Metallurgy, vol.120, issue 5, pp.313-318, May 2020.
  • Tuğral Arslan H., Üper O., Özdurmuşoğlu T., Arslan C., Baydoğan N., “Optical Model of Sol-Gel Derived Al: Zno Thin Film”, Acta Scientific Ophthalmology, Vol. 2, No. 10, 2019, pp.12-15, ISSN: 2582-3191
  • Bel T., Arslan C., Baydoğan N., “Radiation shielding properties of poly (methyl methacrylate) / colemanite composite for the use in mixed irradiation fields of neutrons and gamma rays”, Materials Chemistry and Physics, Vol. 221, 1 January 2019, pp.58-67, https://doi.org/10.1016/j.matchemphys.2018.09.014
  • Sezer R., Arslan C., “Mechano-chemical conversion of celestite in highly concentrated sodium carbonate media”, Physicochemical Problems of Mineral Processing, 55(2), 2019, pp.324-335. DOI: 10.5277/ppmp18134. (https://bit.ly/2RSYG1U)
  • Sezer R., Bilen A., Yılmaz E., Ertürk S., Arslan C., “Investigation of leaching characteristics of celestite concentrate in acidic media and SrCO3 production via precipitation”, Journal of the Faculty of Engineering and Architecture of Gazi University, Vol. 2018, No:18-2, DOI: 10.17341/gazimmfd.460538.
  • Bel T., Arslan C., Baydoğan N., “Production of PMMA / Microsphere / Montmorillonite Nanocomposite and PMMA / Microsphere / Halloysite Nanocomposite by Atom Transfer Radical Polymerization Technique and Comparative Investigation of Mechanical Properties” (PMMA / mikroküre / montmorillonite nanokompozit ve PMMA / mikroküre/halloysite nanokompozitin atom transfer radikal polimerizasyon tekniği ile üretilmesi ve mekanik özelliklerinin karşılaştırmalı olarak incelenmesi), Journal of the Faculty of Engineering and Architecture of Gazi University, 34 (2), 2019, 687-700, DOI: 10.17341/gazimmfd.416525.
  • Çelik C., Arslan C., Arslan F., “Recycling of waste electrical cables”, Material Science and Engineering International Journal, 3 (4), 2019, 107-111. ISSN: 2574-9927.
  • Yılmaz E., Ertürk S., Arslan C., Arslan F., “Silver recovery from dental amalgam wastes”, Material Science and Engineering International Journal, 3 (5), 2019, 172-176. ISNN: 2574-9927. (pdf)
  • Nayır S., Waryoba D.R., Rajagopalan R., Arslan C., Randall C.A., “Cold Sintering of a Covalently Bonded MoS2/Graphite Composite as a High Capacity Li–Ion Electrode”, ChemNanoMat. Volume 4, Issue 10, October 2018, Pages 1088-1094, ISSN: 2199692X, DOI: 10.1002/cnma.201800342
  • Bel T., Çakar H., Yahya N., Arslan C., Baydoğan N., “Investigation of the Bubble Effect in Lightweight PMMA Polymer”, Defect and Diffusion Forum, ISSN: 1662-9507, Vol. 380, pp 227-231, DOI:10.4028/www.scientific.net/DDF.380.227, November 2017.
  • Sezer R., Hızlı G., Bilen A., Ertürk S., Arslan C., “Effect of Mechanical Activation on Roasting of Celestite Ore”, Yer Altı Kaynakları Dergisi | Journal of Underground Resources, 6 (11), 2017, 53-59. (https://dergipark.org.tr/tr/download/article-file/366499)
  • Ebin B., Gürmen S., Arslan C., Lindbergh G., “Electrochemical properties of nanocrystalline LiFexMn2−xO4 (x = 0.2–1.0) cathode particles prepared by ultrasonic spray pyrolysis method”, Electrochimica Acta, Vol. 76, 1, August 2012, pp. 368-374.
  • Ebin B., Gürmen S., Arslan C., “Synthesis and Structural Characterization of LiZn0.5Mn1.5O4 Cathode Materials”, International Journal of Material Science and Electronics Research, Vol. 1, No. 2, July-Dec. 2010, pp. 49-53.
  • Kartal G., Timur S., Arslan C., “Effects of Process Current Density and Temperature on Electrochemical Boriding of Steel in Molten Salts", Journal of Electronic Materials, Vol. 34, No.12, 2005, pp.1538-1542.
  • Gürmen S., Orhan G., Arslan C., Timur S., “Copper Refining Electrolysis at High Current Densities", ARI - The Bulletin of the İstanbul Technical University, Vol. 54, No.2, July 2004, pp.40-44.
  • Arslan C., Arslan F., “Thermochemical Review of Jarosite and Goethite Stability Regions at 25 and 95°C", Turkish Journal of Engineering and Environmental Sciences, 27, 2003, pp.45-52.
  • Arslan C., Arslan F., “Recovery of copper, cobalt, and zinc from copper smelter and converter slags", Hydrometallurgy, Vol. 67, (1), 2002, pp.1-7.
  • Orhan G., Arslan C., Bombach H., Stelter M., “Nickel recovery from the rinse waters of plating baths", Hydrometallurgy, Vol. 65, (1), 2002, pp.1-8.
  • Gürmen S., Timur S., Arslan C., Duman İ., “Production of Pure Tungsten Oxide from Scheelite Concentrates", Scandinavian Journal of Metallurgy, 31, (3), 2002, pp.221-229.
  • Çamcı L., Aydın S., Arslan C., “Reduction of Iron Oxides in Solid Wastes Generated by Steelworks", Turkish Journal of Engineering and Environmental Sciences, 26, 2002, pp.37-44.
  • Arslan F., Arslan C., Çelik M.S., “Arsenic Removal through the Decrepitation of Colemanite Ores", Powder Technology, 25 June 1999, Vol./Issue: 103/3, 260-264.
  • Orhan G., Arslan C., “Investigating the Effects of Charge Components on Metallic Chromium Production via Aluminothermic Route with no External Energy", Minerals & Metallurgical Processing, May 1999, Vol. 16, No.2, 62-64.
  • Gürmen S., Timur S., Arslan C., Duman İ., “Acidic Leaching of Scheelite Concentrate and Production of Hetero-poly-tungstate Salt", Hydrometallurgy, 51, (1999), 227-238.
  • Arslan C., Duby P., “The Anodic Oxidation of Cr(III) to Cr(VI) in a Laboratory-Scale Chromium Electrowinning Cell", Hydrometallurgy, 46, (1997), pp.337-348. https://doi.org/10.1016/S0304-386X(97)00029-7
  • Arslan C., Orhan G., “Investigation of Chrome(VI) Oxide Production from Chromite Concentrates by Alkali Fusion", International Journal of Mineral Processing, 50, (1997), pp.87-96. DOI: 10.1016/s0301-7516(97)00009-4
  • Aydın S., Taptık Y., Arslan C., “Scrap, Recycling and Steel Production -A General Perspective and Türkiye's Standpoint", Ironmaking and Steelmaking, Vol. 23, No. 3, 1996, pp.242-246. WOS:A1996VJ64900008
  • Aydın S., Arslan C., Taptık Y., Dikeç F., “Turkish Iron and Steel Industry: Developments Within The Last 15 Years", Steel World, No:1, 1996, pp.95-101.
  • Şirin B., Açma E., Arslan C., Addemir O., “The Effect of Sulphur on Tungsten Recovery from Scheelite Concentrates by Alkali Fusion", Canadian Metallurgical Quarterly, Vol. 33, No. 4, 1994, pp.313-318.
  • Oktaybaş C., Açma E., Arslan C., Addemir O., “Kinetics of Copper Precipitation by H2S from Sulfate Solutions", Hydrometallurgy, 35, 1994, pp.129-137. DOI: 10.1016/0304-386X(94)90024-8
  • Tayfun Bel, Cüneyt Arslan, Nilgün Baydoğan, “PMMA/Mikroküre/Montmorillonit Nanokompozit ve PMMA/Mikroküre/Halloysite Nanokompozitin Atom Transfer Radikal Polimerizasyon Tekniği ile Üretilmesi ve Mekanik Özelliklerinin …”, Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 34 (2), 687-700 , 2019
  • G Kartal, S Timur, C Arslan, “SPECIAL ISSUE ON MICROSTRUCTURES AND TEXTURES OF FILMS AND COATINGS IN ELECTRONIC APPLICATIONS-Effects of Process Current Density and Temperature on Electrochemical Boriding of …”, Journal of Electronic Materials 34 (12), 1538-1542 , 2005
  • J Jandov, M Pedlik, C Oktayba, E Aqma, C Arslan, O Addemir, “Technical Notes Leaching behaviour of iron-nickel alloys in ammoniacal solution”, Hydrometallurgy 35, 397-399 , 1994
  • Bel, Baydoğan, Arslan, Yahya, “Preparation and Characterization of PMMA/Graphene Nanoplatelets Polymer Nanocomposite”, Journal of Materials Engineering and Performance
National Articles (10)
  • Büyükfırat M.Ü., Arslan C., “Ekstrüzyon kalıplarının aşınma dirençlerinin ısıl işlem ve PVD kaplama metoduyla arttırılması”, Metal Dünyası, Sayı 308, Şubat 2019, Sayfa 61-65.
  • Arslan F., Arslan C., “Bakır Üretim Prosesleri (III) -Copper Production Processes (III)", Copper Life, Sayı 7, Temmuz/Ağustos 2006, Sayfa 36-41/59-64.
  • Arslan F., Arslan C., “Bakır Üretim Prosesleri (II) -Copper Production Processes (II)", Copper Life, Sayı 5, Nisan 2006, Sayfa 38-47.
  • Arslan F., Arslan C., “Bakır Üretim Prosesleri (I) -Copper Production Processes (I)", Copper Life, Sayı 4, Şubat 2006, Sayfa 34-40.
  • Arslan C., “Çinko Elektrolizinde Metanol İlavesinin Mekanizması ve Laboratuar Çapta İncelenmesi", Metalurji Dergisi, Sayı 93, Aralık 1994, Sayfa 47-54.
  • Arslan F., Arslan C., Açma E., “Altın ve Gümüş Ekstraksiyonunda Siyanür Liçine Alternatif Prosesler", Metalurji Dergisi, Sayı 85, Ağustos 1993, Sayfa 57-65.
  • Arslan F., Arslan C., Açma E., “Türkiye'deki Altın Cevherlerinin Değerlendirilme Olanaklarına Genel Bakış", Metalurji Dergisi, Sayı 79, Kasım 1992, Sayfa 43-52.
  • Kellogg H.H. (yazan), Arslan C. (çeviren), “Demir dışı Pirometalurjisindeki Eğilimler II", Metalurji Dergisi, Sayı 43, Nisan 1986, Sayfa 7-16.
  • Kellogg H.H. (yazan), Arslan C. (çeviren), “Demir dışı Pirometalurjisindeki Eğilimler I", Metalurji Dergisi, Sayı 42, Şubat 1986, Sayfa 5-18.
  • R Sezer, A Bilen, E Yılmaz, S Ertürk, C Arslan, “Selestit konsantresinin asit ortamında liç özelliklerinin incelenmesi ve çöktürme yöntemiyle SrCO3 üretimi”, Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi 34 (3), 1409-1416 , 2019
Books & Book Chapters (11)
  • Arslan F., Arslan C., “Zeolit", Endüstriyel Mineraller El Kitabı, G. Önal, E. Yüce, O. Kangal, D. Ergunalp, (Editörler), s.329-335, İstanbul Maden İhracatçıları Birliği, Temmuz 2023, İstanbul.
  • Arslan C., Arslan F., “Antimuan", Endüstriyel Mineraller El Kitabı, G. Önal, E. Yüce, I. Özpeker, A. Güney, (Editörler), s.9-14, İstanbul Maden İhracatçıları Birliği, Ekim 1999, İstanbul.
  • Arslan F., Arslan C., “Nadir Toprak Metalleri", Endüstriyel Mineraller El Kitabı, G. Önal, E. Yüce, I. Özpeker, A. Güney, (Editörler), s.143-149, İstanbul Maden İhracatçıları Birliği, Ekim 1999, İstanbul.
  • Türkiye Kurşun Envanteri, (Kollektif çalışma), A. Ekrem Yüce (Editör), İstanbul Maden İhracatçıları Birliği, Temmuz 1998, İstanbul.
  • Türkiye Bakır Envanteri, (Kollektif çalışma), A. Sirkeci (Editör), İstanbul Maden İhracatçıları Birliği, Temmuz 1998, İstanbul.
  • Türkiye Çinko Envanteri, (Kollektif çalışma), A. Güney (Editör), İstanbul Maden İhracatçıları Birliği, Temmuz 1998, İstanbul.
  • Addemir O., Açma E., Arslan C., ÇİNKO, Sistem Yayıncılık, İstanbul, Mart 1995, ISBN No: 975-7397-41-5.
  • Ateşok G., Arslan C., “Sampling of Coal", Ch.15 in COAL, O. Kural (Editor), İstanbul, 1994, pp.207-214, ISBN No: 975-95701-1-4.
  • Dikeç F., Ateşok G., Arslan C., “Coking of Coal", Ch.24 in COAL, O. Kural (Editor), İstanbul, 1994, pp.309-335, ISBN No: 975-95701-1-4.
  • İ.T.Ü. ABET 2000 Terim Sözlüğü, İTÜ ABET PROJESİ Terim Birliği Sağlama Komisyonu: Tulunay Y., Serarslan M.N., Devres O., Arslan C., Gürbüz H., Aran N., Eskin N.
  • Orhan Kural, “Coal: resources, properties, utilization, pollution”
Proceedings (82)
  • Arslan F., Bulut G., Arslan C., “Recovery of metallic values from copper slags”, XX Balkan Mineral Processing Congress, 9-11 April 2026, İstanbul-Türkiye, pp. 610-616.
  • Sorkhe Y.A., Öztürk O., Bavafa P., Arslan F., Arslan C., “Synthesis of pseudobrookite powder via oxidative calcination of ilmenite for photocatalytic applications”, XX Balkan Mineral Processing Congress, 9-11 April 2026, İstanbul-Türkiye, pp. 657-671.
  • Arslan F., Arslan C. “Recycling of waste cell phones” in: Zoran Š., Milan T., editors. Proceedings of XVI International Mineral Processing and Recycling Conference; 28.05.2025 - 30.05.2025; Belgrade. University of Belgrade, Technical Faculty, Bor; 2025. p. 292-7. https://doi.org/10.5937/IMPRC25292A.
  • Arslan F., Arslan C., Ilgın Ş., “Recovery of rare earth elements from secondary sources”, Proceedings of XIX - Mineral Processing Congress, May 28-31, 2023, Mitrovice, Kosovo, pp.351-360.
  • Arslan F., Arslan C., “Importance of hydrological and geochemical studies in solution mining”, 17th International Mineral Processing Symposium, Dec.15-17, 2022, İstanbul Türkiye, pp.589-595.
  • Arslan F., Arslan C., Yılmaz M.Y., “Iron removal from drinking and wastewaters by precipitate flotation”, 17th International Mineral Processing Symposium, Dec.15-17, 2022, İstanbul Türkiye, pp.861-868.
  • Arslan F., İlsever E., Can M.F., Arslan C., Çelik M.S., “Removal of boron from wastewaters by membrane supported reverse osmosis system”, 17th International Mineral Processing Symposium, Dec.15-17, 2022, İstanbul Türkiye, pp.965-972.
  • Tuluk D., Arslan C., Baydoğan N., “Investigation of Boron Carbide Behavior on Polymethylmethacrylic”, International Conference on Nuclear Technology, Radiation Safety and Advanced Technological Researches (ICNRA 2021), pp.165, (2021)
  • Yılmaz E., Arslan C., Arslan F., “Recovery of nickel from laterite leach solution by ion exchange resin”, International Mineral Processing Conference Eurasia 2019, IMPC-EURASIA 2019, 31.10.2019-2.11.2019, Antalya, 607-614, ISSN: 978-975-7946-44-1.
  • Arslan F., Çuhadar İ.E., Perek K.T., Arslan C., Recycling of old mobile phones”, International Mineral Processing Conference Eurasia 2019, IMPC-EURASIA 2019, 31.10.2019-2.11.2019, Antalya, 747-756, ISSN: 978-975-7946-44-1.
  • Arslan F., Arslan C., Hidrometalurji Tesisleri ve Yenilikler, “Cevher ve Kömür Hazırlama Tesislerinde Yenilikler, Denetim ve Maliyet Kontrolü”- Educational Seminar, ITU Vakfı Maçka Sosyal Tesisleri / İstanbul, June 24-25, 2019 (36 pages).
  • Yılmaz E., Sezer R., Ertürk S., Arslan C., Arslan F., “Recovery of nickel from low concentrated solutions via chelating ion exchange resin”, 18th Balkan Mineral Processing Congress (BMPC 2019), Durres, Albania, May 23-26, 2019.
  • Sezer R., Yılmaz E., Ertürk S., Arslan C., “Calcination of strontium carbonate in rotary kiln furnace”, 10th International Symposium on High-Temperature Metallurgical Processing, The Minerals, Metals & Materials Series, San Antonio, Texas, 10-14 March 2019, pp.591-597. DOI: 10.1007/978-3-030-05955-2_56.
  • Ulus A., Ertürk S., Arslan C., “Evaluation of usability for molten route manufactured aluminium composite foam panels”, Aluminium 2018 Conference, Düsseldorf, Germany, 9-11 October, 2018, paper 06 | 01-11.
  • Arslan F., Çuhadar İ.E., Perek K.T., Arslan C., “Recovery of metals from end-of-life mobile phones by acidic leaching”, 16th International Mineral Processing Symposium, Belek, Antalya, 23-25 October 2018, pp.499-504.
  • Bel T., Noorhana Y., Çimenoğlu H., Arslan C., Baydoğan N., “The examination of the changes in the magnetic properties of the poly(methyl methacrylate)”, ICFAS - ESTCON 2018, Kuala Lumpur, Malaysia, Vol. 1123, 15 Ağustos 2018, s. 12005, Invited Speaker, (https://iopscience.iop.org/article/10.1088/1742-6596/1123/1/012005/pdf).
  • Hızlı İ.G., Sezer R., Gürsoy Ö., Ertürk S., Arslan C., Dışpınar D., “Production Of Strontium Modifier from Different Sources”, 19th International Metallurgy and Materials Congress (IMMC2018), Istanbul, Türkiye, October 25-27, 2018, pp.483.
  • Sezer R., Yılmaz E., Ertürk S., Arslan C., "Kinetics of Thermal Decomposition of Strontium Carbonate", 1st International Technology Sciences and Design Symposium – ITESDES 2018, Giresun-Türkiye, June 27-29, 2018, pp.433.
  • Yılmaz E., Sezer R., Ertürk S., Arslan C., "Investigation the Reduction Behavior of Manganese Ore Pellets", 1st International Technology Sciences and Design Symposium – ITESDES 2018, Giresun-Türkiye, June 27- 29, 2018, pp.432.
  • Sezer R., Yılmaz E., Akça S., Ertürk S., Arslan C., "Recycling of Metallic Values from Gold Plated Brass Scrap", 1st International Technological Sciences and Design Symposium – ITESDES 2018, Giresun-Türkiye, June 27-29, 2018, pp.453.
  • Yılmaz E., Sezer R., Ertürk S., Arslan C., "Thermal Characterization of Manganese Concentrate", 1st International Technological Sciences and Design Symposium – ITESDES 2018, Giresun-Türkiye, June 27-29, 2018, pp.452.
  • Hızlı G., Sezer R., Gürsoy Ö., Ertürk S., Arslan C., Dışpınar D., "Production of Modifier for Al-Si Alloys", 1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük-Türkiye, March 22-24, 2018, pp. 78-79, ISBN: 978-605-9554-16-9.
  • Ertürk S., Sezer R., Arslan C., “Alumino-thermic Reduction of SrO and SrCO3”, TMS 2018, 147th Annual Meeting & Exhibition, (poster presentation), March 11-15, 2018, Phoenix, USA. (https://bit.ly/2pSsejA)
  • Sezer R., Bilen A., Ertürk S., Arslan C., “Optimization of Celestite Leaching by Using Response Surface Methodology”, TMS 2018, 147th Annual Meeting & Exhibition, March 11-15, 2018, Phoenix, USA.
  • Ulus A., Ekici H., İpek S.K., Ertürk S., Arslan C., “Change of Slag Characteristics due to Chemical Composition and Rafination Process Parameters in Aluminum Alloys”, European Aluminium Congress 2017, Vol.1, 27-28 November, 2017, Düsseldorf, Germany.
  • Hızlı G., Bilen A., Sezer R., Ertürk S., Arslan C., “Strontium Carbonate Precipitation with Ammonium Carbonate from Strontium Sulphide Solution”, XVII th Balkan Mineral Processing Congress, BMPC 2017, pp.551-555, November 1-3, 2017, Antalya-Türkiye.
  • Bilen A., Hızlı G., Sezer R., Ertürk S., Arslan C., “Strontium Carbonate Precipitation from Strontium Sulfide Solution”, XVIIth Balkan Mineral Processing Congress, BMPC 2017, pp.543-550, November 1-3, 2017, Antalya, Türkiye.
  • Yılmaz E., Ertürk S., Arslan F., Arslan C., “Dental amalgam wastes: Properties, environmental effects and recycling processes”, XVIIth Balkan Mineral Processing Congress, BMPC 2017, pp.187-195, November 1-3, 2017, Antalya, Türkiye.
  • Ekici H., Ulus A., Ertürk S., Arslan C., Dağdelen E., "Alüminyum Sürekli Döküm Alaşımlarında Alaşım Kombinasyonuna Bağlı Olarak Curuf İçeriğinin Yapısal ve Elementel Analizi", 8. Alüminyum Sempozyumu, 5-6 Ekim 2017, İstanbul Fuar Merkezi, İstanbul.
  • Sezer R., Bilen A., Hızlı G., Ertürk S., Arslan C., “Direct Conversion of Celestite to SrCO3 by Wet Milling”, TMS 2017, 146th Annual Meeting & Exhibition Supplemental Proceedings, pp.609-614, 26 February - 3 March 2017, San Diego, California.
  • Ertürk S., Sezer R., Hızlı G., Bilen A., Arslan C., “Roasting of Celestite in Laboratory Scale Rotary Furnace”, 8th International Symposium on High-Temperature Metallurgical Processing, pp.469-476, 26 February - 3 March 2017, San Diego, California.
  • Hızlı G., Bilen A., Sezer R., Ertürk S., Arslan C., “Production of Strontianite from Celestite Ore in Carbonate Media”, 3rd Pan American Materials Congress, pp.607-613, 26 February - 3 March 2017, San Diego, California.
  • Hızlı G., Bilen A., Sezer R., Yılmaz E., Ertürk S., Arslan C., “Investigating the Dissolution Characteristics of Strontium Sulfide”, 3rd Pan American Materials Congress, pp.539-545, 26 February - 3 March 2017, San Diego, California.
  • Sezer R., Hızlı G., Bilen A., Ertürk S., Arslan C., “Effect of Mechanical Activation on Roasting of Celestite Ore”, International Black Sea Mining & Tunneling Symposium, Proceeding Book, November 2-4, 2016, Trabzon, Türkiye.
  • Bilen A., Hızlı G., Sezer R., Ertürk S., Arslan C., “Investigating the Dissolution of Celestite in BaCl2 and MgCl2 Medium”, International Black Sea Mining & Tunneling Symposium, Proceeding Book, November 2-4, 2016, Trabzon, Türkiye. / Selestit Mineralinin BaCl2 ve MgCl2 İçeren Ortamlarda Çözünürlüğünün Araştırılması
  • Yılmaz E., Ertürk S., Arslan F., Arslan C., “Recovery of Silver and Copper from Dental Amalgam Wastes Via Hydrometallurgical Processes”, TMS 2015, 144th Annual Meeting and Exhibition, March 15-19, 2015, Orlando, Florida.
  • Yılmaz E., Ertürk S., Arslan, F., Arslan, C., “Recovery of Silver from Dental Amalgam Wastes Via Hydrometallurgical Processes”, (poster presentation), IMPS 2014, 14th International Mineral Processing Symposium and Exhibition, October 15-17, 2014, Kuşadası, Türkiye.
  • Sevim E., Ertürk S., Arslan C., “Oxidative and Carbonative Precipitation of Iron from Manganese Leach Solutions”, TMS 2014, 143rd Annual Meeting and Exhibition, February 16-20, 2014, San Diego, California.
  • Kılıçarslan E., Ertürk S., Arslan C., “Leaching of High Carbon Ferromanganese in Acidic Medium”, (poster presentation), TMS 2014, 143rd Annual Meeting and Exhibition, February 16-20, 2014, San Diego, California.
  • Çelik C., Kokkılıç O., Eke K., Kangal M. O., Arslan C., Arslan F., “Recovery of Copper and Plastics from Waste Electrical Cables”, International Mineral Processing Symposium, IMPS 2012, Oct. 10-12, 2012, Bodrum, Türkiye.
  • Ebin B., Gürmen S., Arslan C., “Synthesis of Nanocrystalline Cu3B2O6 Particles by Ultrasonic Spray Pyrolysis Method”, TMS 2011 140th Annual Meeting & Exhibition, San Diego, California, U.S.A., 27 February - 3 March 2011.
  • Ebin B., Gürmen S., Arslan C., “Aerosol Route Synthesis of Lithium Borate Spheres Using Lithium Nitrate and Boric Acid Solution”, TMS 2011 140th Annual Meeting & Exhibition, San Diego, California, U.S.A., 27 February - 3 March 2011.
  • Ebin B., Gürmen S., Arslan C., “Preparation and Electrochemical Properties of Nanostructured Lithium Manganese Oxide Based Cathode Particles”, TMS 2011 140th Annual Meeting & Exhibition, San Diego, California, U.S.A., 27 February - 3 March 2011.
  • Gürmen S., Ebin B., Arslan C., “Synthesis of Nanocrystalline Lead Oxide Particles by Ultrasonic Spray Pyrolysis Method”, s. 407-410, PM2010 Powder Metallurgy World Congress & Exhibition, Florence/Italy, 10-14 October 2010.
  • Ebin B., Gürmen S., Arslan C., “Synthesis and Structural Characterization of LiZn0.5Mn1.5O4 Cathode Materials”, 06/2010, s. 249, NanoTR-VI, 6th Nanoscience and Nanotechnology Conference, İzmir, Türkiye, 14.06.2010 - 18.06.2010
  • Ebin B., Gürmen S., Arslan C., “Ultrasonik Destekli Sol-Jel Yöntemiyle Üretilen CuO Nanoyapılarında Kristal Büyümesinin İncelenmesi”, 15. Uluslararası Metalurji ve Malzeme Kongresi, İstanbul, Türkiye, 11-13 Kasım, 2010.
  • Ebin B., Gürmen S., Arslan C., “Preparation of Nanostructured Iron Oxide Particles via Ultrasonic Spray Pyrolysis”, TMS 2009 Annual Meeting and Exhibition, San Francisco, U.S.A., 15-19 February 2009.
  • Arslan C., Gürmen S., Duman İ., Aksoylu B., “Yüksek Akım Yoğunluklarında Bakır Rafinasyon Elektrolizinde Hücre Dizaynı”, 14. Uluslararası Metalurji ve Malzeme Kongresi, 16-19 Ekim 2008, İstanbul.
  • Yazıcı E., Ebin B., Gürmen S., Arslan C., Özkal B., “Preparation of Silver Nanoparticles from Ultrasonic Spray Pyrolysis of Aqueous Silver Nitrate Solution”, NanoTR-IV, 4th Nanoscience and Nanotechnology Conference, I.T.U., İstanbul, Türkiye, 9-13 June 2008.
  • Ebin B., Gürmen S., Arslan C., “Synthesis of Porous Submicronic Iron/Iron Oxide Spherical Powders Formed by Nanoparticles Cluster via Ultrasonic Spray Pyrolysis”, NanoTR-IV, 4th Nanoscience and Nanotechnology Conference, I.T.U., İstanbul, Türkiye, 9-13 June 2008.
  • Onuk G., Gürmen S., Arslan C., “Effect of Different Anode Materials on Electrolysis of Chromium from Synthetic Chrome-alum Solution”, European Metallurgical Conference 2007, June 11-14, 2007, p. 2042-2043, Düsseldorf, Germany.
  • Onuk G., Gürmen S., Arslan C., “Effect of Catholyte Flowrate on Current Efficiency of Electrolytic Chromium Production from Synthetic Cr-Alum Solutions”, 13. International Metallurgy and Materials Congress, 9-11 November 2006, İstanbul.
  • Arslan F., Giray Ç., Öztürk A., Kangal M.O., Orhan G., Arslan C., “Evaluation of Copper Refining Furnace Dusts”, XXIII. International Mineral Processing Congress, IMPC 2006, 3-8 September, 2006, İstanbul, Vol. 2, pp. 1505-1510.
  • Güven A., Emre M., Arslan C., Timur S., “Effect of Aging on Color Properties of Gold Alloys”, Proceedings of European Metallurgical Congress, September 18-21, 2005, Dresden, Germany.
  • Orhan G., Öztürk A., Arslan C., “Recovery of Base and Heavy Metals from Copper Refining Furnace Dusts”, Proceedings of European Metallurgical Congress, September 18-21, 2005, Dresden, Germany.
  • Kahvecioğlu Ö., Ertürk S., Arslan C., Timur S., “Silver Cementation from Nitrate Solutions onto Copper in Classical and Forced Convection Systems”, Proceedings of European Metallurgical Congress, September 18-21, 2005, Dresden, Germany.
  • Orhan, G., Gürmen, S., Güven A., Arslan, C., “Elektrik Ark Fırını (EAF) Baca Tozlarının Hidrometalurjik Değerlendirilmesi”, 12. International Metallurgy and Materials Congress, 28 September - 2 October 2005, İstanbul.
  • Orhan G., Gürmen S., Arslan C., “De-Metallization of Copper-Containing Industrial Wastewaters by Various Electrolysis Systems”, European Metallurgy Congress, 16-19 September 2003, Vol. 3, s. 921-933, Hannover, Germany.
  • Orhan G., Arslan C., Gürmen S., Timur S., “Yıkama Sularından Elektrolitik Bakır Kazanımında pH Değerinin Etkisi”, 11. International Metallurgy and Materials Congress, 5-8 June, 2002, s. 686-693, İstanbul.
  • Gürmen S., Timur S., Arslan C., Duman İ., “Effect of Grinding Method on Tungsten Efficiency in Chelate-added Leaching of Scheelite Concentrates”, 9th Balkan Mineral Processing Congress, Sep. 11-13, 2001, İstanbul.
  • Orhan G., Arslan C., Timur S., Duman İ., “Recovery of Copper from the Copper Sulfate Containing Rinse Water”, 9th Balkan Mineral Processing Congress, Sep. 11-13, 2001, İstanbul.
  • Aydın S., Yücel O., Arslan C., Köksal A., “The Present Situation of Ferroalloy Production and Consumption in Türkiye”, Proceedings of the 9th International Ferroalloys Congress, INFACON 9, pp. 544-549, June 3-6, 2001, Quebec City, Canada.
  • Gürmen S., Timur S., Arslan C., Duman İ., “A New Alternative in Tungsten Production: Chelate-Added Acidic Leaching”, Proceedings of the 8th International Mineral Processing Symposium (IMPS-2000), pp. 467-471, October 16-18, 2000, Antalya.
  • Timur S., Gürmen S., Orhan G., Arslan C., Duman İ., “Beneficiation of Brass Ashes”, XXI International Mineral Processing Congress, pp. C12a-27 - C12a-33, 23-27 July 2000, Rome, Italy.
  • Arslan C., Arslan F., Demir A., “Sulphuric Acid Leaching of Manganese Carbonate Ores and Its Kinetics”, 10. International Metallurgy and Materials Congress, 24-28 May 2000, İstanbul.
  • Arslan C., Arslan F., Demir A., “Acidic Leaching of Denizli-Tavas Region Manganese Ores”, 8th Balkan Mineral Processing Congress, Vol. 1, pp.345-351, September 14-18, 1999, Belgrade-Yugoslavia.
  • Timur S., Gürmen S., Arslan C., Duman İ., “Kurşun Anotların Elektrokimyasal ve Mekanik Özelliklerine Alaşım Elementlerinin Etkisi”, 9. International Metallurgy and Materials Congress, 11-15 June 1997, İstanbul.
  • Çınarlı M., Arslan C., Sesigür H., “Manganez Çözeltilerinden Demirin Uzaklaştırılması ve Proses Değişkenlerinin Etüdü”, 9. International Metallurgy and Materials Congress, 11-15 June 1997, İstanbul.
  • Orhan G., Arslan C., “Alüminotermik Yöntemle Metalik Krom Üretimi”, 9. International Metallurgy and Materials Congress, 11-15 June 1997, İstanbul.
  • Aydın S., Arslan C., Dikeç F., “The Development in the Ferroalloy Production and Consumption of Türkiye”, Proceedings of the 7th International Ferroalloys Congress, INFACON 7, pp.297-306, 11- 14 June 1995, Trondheim, Norway.
  • Orhan G., Arslan C., Açma E., Addemir O., “Alkali Füzyon Yöntemi ile Yerli Kromit Konsantrelerinden Krom(VI) Oksit Üretim Olanaklarının Araştırılması”, 8. International Metallurgy and Materials Congress, 6-9 June 1995, İstanbul.
  • Aydın S., Arslan C., Dikeç F., Duman İ., “Türkiye'deki Demir Dışı Metal Üretim Sektörünün Durumu ve Dünya'daki Yeri”, 8. International Metallurgy and Materials Congress, 6-9 June 1995, İstanbul.
  • Taptık Y., Aydın S., Arslan C., “Metal Recycling and Its Economics in Developing Countries - Case Study: Türkiye”, Proceedings of The Second International Conference on The Recycling of Metals, ASM International, pp.183-190, 19-21 October 1994, Amsterdam, Holland.
  • Vidal R., Arslan C., Duby P., “Laboratory- Scale Investigation of the Electrowinning of Chromium from Chrome- Alum Electrolyte”, Proceedings of the 1994 TMS Annual Meeting, pp.329-346, Feb 27- March 3, 1994, San Francisco, California.
  • Şirin B., Açma E., Arslan C., Addemir O., “Düşük Tenörlü Şelit Konsantresinin Alkali Füzyon ile Değerlendirilmesi ve Kükürdün Tungsten Kazanımına Etkisi”, 7. International Metallurgy and Materials Congress, 4-8 May 1993, Ankara.
  • Açma E., Sesigür H., Arslan C., Addemir O., Tekin A., “Production of Copper, Cobalt and Magnetic Iron Oxide from the Ancient Copper Slags”, Proceedings of The Paul E. Queneau International Symposium on “Extractive Metallurgy of Copper, Nickel, and Cobalt”, 1993 TMS Annual Meeting, Volume 1: Fundamental Aspects, pp. 1181-1193, Eds: R.G. Reddy, R.N. Weizenbach, 21- 25 February 1993, Denver, Colorado.
  • Arslan C., Duby P., “Modeling the Aqueous Chromium Electrowinning Cells”, 1992 TMS Annual Meeting, March 2-5, 1992, San Diego, California.
  • Arslan C., Duby P., “Anodic Oxidation of Cr(III) to Cr(VI) in Chromium Electrowinning”, Extended Abstracts of The 179th Electrochemical Society Meeting, Vol. 91- 1, pp.811-812, May 5- 10, 1991, Washington D.C.
  • Beshers D.N., Duby P., Arslan C., Arslan F., Cukrowski L., Lim B.S., Perpich M.J., Sheikh G., “Effect of Corrosion on Strength of Eutectoid Steel - Metallurgical Investigation of Wires from the Cables of the Williamsburg Bridge in New York”, poster presentation, The 8th International Conference on Strength of Metals and Alloys, August 21-26, 1988, Tampere, Finland.
  • N Baydoğan, N Koken, B Benli, T Bel, O Urper, E Enstitüsü, “Polymer and nanocomposites: Symposium, 21-22 February 2018, Abstract book”, İstanbul Teknik Üniversitesi , 2018
  • B Sirin, E Acma, C Arslan, O Addemir, “The Effect of Sulphur on the Dissolution Efficiency of Tungsten in the Alkali Fusion of Low-Grade Scheelite Concentrates”, 7 th International Metallurgy and Materials Congress. 1, 231-249 , 1993
  • F. Arslan, C. Arslan, Burat, Özer, Perek, “Studies on Recovery of Metals from Electronic and Electrical Wastes by Physical Separation Methods”, XVII. Balkan Mineral Processing Congress
Theses (4)
  • Ph.D. Thesis: Modeling the Performance of Aqueous Chromium Electrowinning Cells, Columbia University, New York, Thesis Advisor: Professor Paul F. Duby, May 1991.
  • M.Sc. Thesis: The Effect of Methanol Addition in Zinc Electrowinning, Columbia University, New York, Thesis Advisor: Professor Paul F. Duby, December 1985.
  • Yüksek Lisans Tezi: Karadeniz Bakır İşletmeleri A.Ş. Bakır İzabe Curuflarının Asitte Pişirme Yöntemi ile Değerlendirilmesi, İTÜ Metalurji Fakültesi, Tez Danışmanı: Prof.Dr. Fuat Yavuz Bor, 1982.
  • Lisans Tezi: Alüminyum Elektroliz Hücrelerinde Tuzlar ve Geri Kazanılmaları, İTÜ Metalurji Fakültesi, Tez Danışmanı: Prof.Dr. Fuat Yavuz Bor, 1980.
Patents (2)
  • Nilgün Baydoğan, Ali Yılmaz, Tayfun Bel, Hassan Soleimani, Noorhana Yahya, Cüneyt Arslan, Hasan Gökçe, Dumitru Ulieru, “Poly (Methyl Methacrylate) Solution Synthesis For Enhanced Oil Recovery”, TR Patent App. 2021-GE-788354.
  • Cüneyt Arslan, Yahya Akbari Sorkhe, “Zero-Waste Production of Fe2TiO5 Pseudobrookite Ceramic Pigment from Ilmenite”, TR Patent App. 2024/009, 637.

Other Links

updated on: October 2026